Please help
- Thread starter acerrc500
- Start date
athlon64fx
Golden Master
- Messages
- 6,191
make sure that you are within range of teh access point and also.....you may want to check out your wireless softwares configuration
Internet connectivity setup for windows xp:::::::
go to "network connections"
go to the connection
make sure that it has gotten the right IPs if it is setup as defualt for DHCP
if not you may have to statically assign an IP
do this by right clicking on that connection and going to properties,
now go to TCP/IP protocol
then click properties.
now go to the address section and enter the values that you need.
(for help on this go to the router setup on linksys network everywhere routers or linksys in genreal go to the IP confi address and then look at the settings there and the IP range)
then you'll enter these addresses in there:
for example if my router had the IP of:
112.110.1.1
your IP address Id select would be: 112.110.100.1
the subnet mask is inputted for you:
the defualt gateway is your router's IP. which in this case would be 112.110.1.1
and then look for the DNS servers on your routers setup....
to make this easier linksys gives you a setup cd!!!
To get online with Internet explorer you'd go to your internet explorer properties and go to connections, then lan settings,
there you'd check the "automatic settings" checkbox and click ok.
then click ok to close the rest.
to share files all you would need to do is to right click on "my computer" and go to computer name and choose a workgroup name for your home network shoose soemthing creative and easy to remember keep it short.
then do the same on teh other computers!
Internet connectivity setup for windows xp:::::::
go to "network connections"
go to the connection
make sure that it has gotten the right IPs if it is setup as defualt for DHCP
if not you may have to statically assign an IP
do this by right clicking on that connection and going to properties,
now go to TCP/IP protocol
then click properties.
now go to the address section and enter the values that you need.
(for help on this go to the router setup on linksys network everywhere routers or linksys in genreal go to the IP confi address and then look at the settings there and the IP range)
then you'll enter these addresses in there:
for example if my router had the IP of:
112.110.1.1
your IP address Id select would be: 112.110.100.1
the subnet mask is inputted for you:
the defualt gateway is your router's IP. which in this case would be 112.110.1.1
and then look for the DNS servers on your routers setup....
to make this easier linksys gives you a setup cd!!!
To get online with Internet explorer you'd go to your internet explorer properties and go to connections, then lan settings,
there you'd check the "automatic settings" checkbox and click ok.
then click ok to close the rest.
to share files all you would need to do is to right click on "my computer" and go to computer name and choose a workgroup name for your home network shoose soemthing creative and easy to remember keep it short.
then do the same on teh other computers!
athlon64fx
Golden Master
- Messages
- 6,191
Youre very welcome!! 
