ok go to command prompt ( start>run>cmd) and then type ipconfig. Then write down the default gateway. now go to control panel, network connect, there should be a form of wireless network option, right click and properties, then right click on Internet protocol TCP/IP and click properties. now you need to click on use the following IP address, the IP is whatever subnet you are on ( if this is spanish take the third number in the default gateway you wrote down, and type 192.168.Whatever it was.10 subnet mask is 255.255.255.0 and the default gateway is what you wrote down. and tell me if any other problems arise. The reason you are not connecting is you can connect ot the router not the DHCP server and you are not being licinced an IP.