water cooling help

esa193

Fully Optimized
Messages
4,210
hey guys im i installed every thing in my water kit so far so well
but i cant get the tubes to go all the way on
what should i do?
 
try both above..
if you put hot water on the tubes it'll make then expand so that they'll slide more easily over the connectors.

also using some kind of lubrication on the connectors, (whether it's your saliva or otherwise) could also help.
 
the hot water worked great here are some pictures
IMG_0376.jpg

IMG_0377.jpg

IMG_0378.jpg
IMG_0379.jpg
IMG_0380.jpg
 
Wrong section my friend. . .


Moved. :D

I was going to suggest a little liquid soap, but you got it figured out. Next time. . .

I would also suggest flipping your reservoir over so the inlets are on the bottom. That would shorten the amount of tubing you'll need and clean things up a bit.

 
reservoir?
where did you see one?
i only see a radiator
and yeah flipping them over will work better
 
Wrong section my friend. . .


Moved. :D

I was going to suggest a little liquid soap, but you got it figured out. Next time. . .

I would also suggest flipping your reservoir over so the inlets are on the bottom. That would shorten the amount of tubing you'll need and clean things up a bit.

i cant becouse it wont self bleed the air
im actually going to be re doing the tubbing im going to cut to holes in my case becouse its to messy the way the tubing is now
 
Back
Top Bottom