[HELP] IBM Server Hard Drisk Problem

Exclikers

Baseband Member
Messages
32
Hello Everyone..

i have a problem on my server... my problem just send me a big monster server with 40klg.. and now i've try to set it up..

The Server has a 2 SATA hard drive on it.. 10,000RPM. 80GB Each..

the two hard drive detects on BIOS when i enter the setup. but when i tried to install Windows Server 2003 on it.. the setup says.. setup was unable to continue setup because no hard disk on your system was detected,, something like that..

so it means the setup dont detect my hard drive.. but the bios yes..

so what is the problem? i try also to run with only one drive. but same problem..

Any solution to this?

Thank you very much
 
use the server guideCD

that'll load the controller drivers and you can install windows from there.
 
you can probably get all of the drivers that are on the guide cd from the manufacturer's web site and then burn them to a disk
 
Do you have any idea what model of motherboard the server has? That would help us help you :D
 
i dont what motherboard is on it.

but here is the info sticked at the case

SERVER IBM XSERIES MXE 460 4x Intel 2.8Ghz 8GB 144GB
 
Back
Top Bottom