|
|
#1 |
|
In Runtime
|
Hello, I've followed ALL the instructions concerning router forwarding with both torrent downloaders, but STILL it continues to hover on the 20kb/s and below line, with a yellow ! at the bottom.
I'm at a loss of what else to do.. any suggestions? "Belkin 7030-4, Intel wireless "g, draft-n" (or ethernet) Although when it's connected to the modem itself, it downloads at 300-400kb/s
__________________
Current Rigs: -EE3T: x2 160gb HDD , X2 6400+, Visiontek and Sapphire 3870's in Crossfire, 2GB Patriot DDR2 1066, 500w dual-rail, Sony DVD-RW. |
|
|
|
|
|
#2 |
|
Solid State Member
Join Date: Jul 2008
Posts: 6
|
You can try to upgrade the firmware try searching the site possibly and there are also homebrew firmwares out for routers made with downloading in mind.
if that doesnt work i would try to possibly try a different port and open up the other numbers within 10 cause u could probaly logging back in to change ur ip port its allowed on because of a renew or power failure happens to me all the time |
|
|
|
|
|
#3 |
|
Golden Master
Join Date: Sep 2006
Posts: 7,893
|
Hmm...well you're clearly doing something wrong with port forwarding if it's faster when directly connected to the modem. In utorrent go to options then speed guide and click "test to see if port is forwarded properly".
__________________
C2D E6600 | 4GB DDR2-800 | 9800GTX+ | Asus P5B-E | 150GB Raptor | 320GB 7200.10 | 750W Xigmatek PSU |
|
|
|
|
|
#4 |
|
Cheesoid
|
You're ISP could be throttling BitTorrent Traffic. Try ticking the "encryption box"
|
|
|
|
|
|
#5 |
|
Golden Master
Join Date: Sep 2006
Posts: 7,893
|
It wouldn't be that if it works fine when directly plugged into the modem.
__________________
C2D E6600 | 4GB DDR2-800 | 9800GTX+ | Asus P5B-E | 150GB Raptor | 320GB 7200.10 | 750W Xigmatek PSU |
|
|
|
|
|
#6 |
|
Cheesoid
|
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|