Originally Posted by mikee286
well my wireless router bricked itself today. I cannot even get into the settings for firmware or anything and the power light is flashing. It's a linksys wrt 350n
Are you using stock firmware or do you have it flashed with DD-WRT or Tomato?
I think you can install DD-WRT through TFTP (?) which apparently sometimes still works when the router is bricked. Might want to take a look at the DD-WRT forums and ask there, the WRT54G/WRT54GL is the most prominent router on the forums but if the WRT350N is supported (not sure) it might help, and it's a much better firmware than stock anyway.
Probably redundant, but have you tried holding in the reset button for 5 seconds when it's plugged in, then unplugging for 5 seconds keeping the button held in, then keep holding for 5-10 more seconds after you plug it back? (unplug and plug in basically while holding reset the whole time) Worked for me when I had some problems flashing it.