Go Back   Computer Forums > General Computing > Overclocking | Cooling | Modding
Click Here to Login
Join Computer forums Today


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-09-2010, 07:06 AM   #21
In Runtime
 
Join Date: Jul 2006
Posts: 197
Default Re: overclocking nightmare

i have done this and nothing.

i unplugged it and removed the CMOS for about 30 min
it takes pushing the power button twice to get it to turn on there are no beeps.i have also moved the ram to different slots thinking that could be it.

i can not get it to boot so i dont know what volts there where.

i can also hold the power button and nothing happens when i need to turn it off.

different video card has also been used and nothing happens.

i have tried every way possible on the button connections.

no hdd light as well
__________________

justinupsm is offline   Reply With Quote
Old 05-09-2010, 11:24 AM   #22
Fully Optimized
 
Grantofhell's Avatar
 
Join Date: Apr 2009
Posts: 3,762
Default Re: overclocking nightmare

Have you checked to make sure all power connections are seated? Especially the 20/24 pin on the motherboard and 4/8 pin near the CPU.
__________________

__________________
RD-PC -//- i7 950 // Evga x58 SLI // 3x2 OCZ PC3-12800 // 2x Evga GTX470 // Corsair HX850 // SilverStone TJ07
Grantofhell is offline   Reply With Quote
Old 05-09-2010, 01:17 PM   #23
Daemon Poster
 
madanchi's Avatar
 
Join Date: Oct 2008
Posts: 529
Default Re: overclocking nightmare

you might have increased the voltage more than you usally safely do without realising
__________________
6950 flashed to 6970 Oc:880cpu 1300memory,2x2gb ddr3 1066,phenomII x4 955 3.2ghz,Tuniq hsf,750w psu,1tb f2 32mb 7200rpm,2tb f4 64mb 7200rpm,cyborg V7, cyborg V3, X-fi creative sounfblaster, Audiophile M-audio,Xclio-windtunnel,Tb7300 graphics tablet
madanchi is offline   Reply With Quote
Old 05-09-2010, 01:49 PM   #24
In Runtime
 
Join Date: Jul 2006
Posts: 197
Default Re: overclocking nightmare

all extra connections have been removed i did make sure of the power and all conections are in.

could the board be ok and the cpu be fryed.

i mean like when you have the wrong type of ram in it dosent post.(but if that was the case then it would beep)
justinupsm is offline   Reply With Quote
Old 05-09-2010, 07:05 PM   #25
Fully Optimized
 
Grantofhell's Avatar
 
Join Date: Apr 2009
Posts: 3,762
Default Re: overclocking nightmare

Unfortunately, the best way I can think of to test these things is to get someone with a proc of the same socket and swap it in. Testing alternate parts is pretty much always the best method.
__________________
RD-PC -//- i7 950 // Evga x58 SLI // 3x2 OCZ PC3-12800 // 2x Evga GTX470 // Corsair HX850 // SilverStone TJ07
Grantofhell is offline   Reply With Quote
Old 05-09-2010, 08:51 PM   #26
In Runtime
 
Join Date: Jul 2006
Posts: 197
Red face Re: overclocking nightmare

I know one person that itmight be posible I will report back as soon as he txts back thanks for the help
justinupsm is offline   Reply With Quote
Old 05-11-2010, 01:21 PM   #27
In Runtime
 
Join Date: Jul 2006
Posts: 197
Default Re: overclocking nightmare

well that fell thou so i will be rebuilding any suggestions for a mobo needs to be ddr2 1200 or less
justinupsm is offline   Reply With Quote
Old 05-11-2010, 03:41 PM   #28
Baseband Member
 
Join Date: Mar 2007
Posts: 25
Default Re: overclocking nightmare

Can you list your system?
There are alot of suggestions from people without knowing what you have which is not a good idea to follow blind suggestions.
A lot of motherboards are picky on resetting from a fail overclock and Asus being the worst.

List your system as follows.
CPU:
Motherboard:
RAM:
PSU:
GPU:

Give this information and complete information and then we can go from there.
ItsLasher is offline   Reply With Quote
Old 05-11-2010, 10:18 PM   #29
In Runtime
 
Join Date: Jul 2006
Posts: 197
Default Re: overclocking nightmare

i was looking at these

mobo

http://www.newegg.com/Product/Produc...82E16813131618

cpu

http://www.newegg.com/Product/Produc...82E16819103674

psu i have a 650 watt is all i can tell you at this point

gpu is to be determined


ram i will use is

http://www.newegg.com/Product/Produc...82E16820145256


note i payed 92$ for that ram like 4 months ago.
justinupsm is offline   Reply With Quote
Old 05-24-2010, 01:22 PM   #30
In Runtime
 
Join Date: Jul 2006
Posts: 197
Default Re: overclocking nightmare

well tanks to all who helped

i got a cheap cpu from ebay and everthing still worked.i managed to fry the cpu

i got a sempron 3400+
__________________

justinupsm is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0