Case Rivets

[VINMAN46]

Gonna be modding my case with custom window and some different paint first part is how do you get the rivets holding the case together? -.-

[sniperviper21]

http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

[VINMAN46]

whoops forgot a word how do you get rid of i read you use a screwdriver ?

[sniperviper21]

http://www.ehow.com/how_4611869_remove-rivets.html

[Atomic Rooster]

You can do what was suggested in the link that sniperviper posted, or you can drill them out.

[VINMAN46]

alright drilling seems easier what kind of spray paint would i need?

[sniperviper21]

Originally Posted by VINMAN46

alright drilling seems easier what kind of spray paint would i need?

ah... the kind that matches your case? lol

[Atomic Rooster]

Krylon is about the best spray paint you can get. You should be able to find it in near any hardware store.

[Tommy Boy]

Originally Posted by VINMAN46

alright drilling seems easier what kind of spray paint would i need?

Any kind of spray paint will work, just remember to prep it correctly because the key to a good paint job is the preparation.

If you can get to the rivets from the backside you can use a dremel with a cutting wheel and cut off the back side of the rivet so you don't take a chance of damaging the front side of the case. Why do you need to take the case apart anyway? You don't necessarily have to do that to paint it. I wouldn't be drilling out any rivets though if I were you.