Ok I have setup a dhcp/tftp server. I am using Tftpd32 .
I have another computer on the network that supports PXE booting.
And it is enabled in the bios.
I am getting this on my boot up screen for the network booting machine
And I am getting this in my log files on Tftpd32
I know at least that it is finding the dhcp/tftp service but is failing to load the image
myth.0 was an iso file that I got at distrowatch which I have used before.
(I renamed it to myth.0 because I didn't know if their was a special . extension I needed )
I am lost on how to get this working. What does the format of this disk image have to be floppy , cd ,...etc Is their any config files I need?
I have another computer on the network that supports PXE booting.
And it is enabled in the bios.
I am getting this on my boot up screen for the network booting machine
Code:
client ip 192.168.1.101 mask 255.255.255.0 dhcp ip 192.168.1.100
gateway ip: 192.168.1.1
PXE-E79: NBP is too big to fit in free base memory
PXE-MBF: Exiting Broadcom PXE ROM
And I am getting this in my log files on Tftpd32
Code:
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0B:DB:2B:0E:F4 [12/10 20:17:59.843]
Client requested address 0.0.0.108 [12/10 20:17:59.843]
DHCP: proposed address 192.168.1.101 [12/10 20:18:02.265]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0B:DB:2B:0E:F4 [12/10 20:18:03.375]
Client requested address 0.0.0.108 [12/10 20:18:03.375]
DHCP: proposed address 192.168.1.101 [12/10 20:18:05.265]
1652 Request 2 not processed [12/10 20:18:05.265]
1652 Request 2 not processed [12/10 20:18:05.265]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:0B:DB:2B:0E:F4 [12/10 20:18:05.640]
Previously allocated address 192.168.1.101 acked [12/10 20:18:05.640]
1652 Request 2 not processed [12/10 20:18:05.640]
Connection received from 192.168.1.101 on port 2070 [12/10 20:18:06.187]
Read request for file <myth.0>. Mode octet [12/10 20:18:06.187]
OACK: <tsize=676710400,> [12/10 20:18:06.187]
Using local port 2137 [12/10 20:18:06.187]
Peer returns ERROR <TFTP Aborted> -> aborting transfer [12/10 20:18:06.203]
I know at least that it is finding the dhcp/tftp service but is failing to load the image
myth.0 was an iso file that I got at distrowatch which I have used before.
(I renamed it to myth.0 because I didn't know if their was a special . extension I needed )
I am lost on how to get this working. What does the format of this disk image have to be floppy , cd ,...etc Is their any config files I need?