Go Back   Computer Forums > General Computing > Hardware
Join Computer forums Today

Thread Tools Search this Thread Display Modes
Old 01-22-2009, 01:28 PM   #1
Beta Member
Join Date: Jan 2009
Posts: 1
Default Remote control problems


I have recently made a remote control via RS232 port, that can be controlled by IgorPlugin. I've successfully tested it on a PC, but what i need to do is to connect it to a laptop. So i've tried two RS232->USB adapters on 3 computers (including a PC) and nothing seems to work. It works only when connected directly to COM port, but does not work via the adapter. COM port settings for adapters match the settings in original COM ports. I've even tested the adapters, by shorting second and third pins to see if loopback works. Everything seemed to work ok.

So does anyone have any ideas on how i could connect this device via an adapter, because i've given up already, don't know what else i could try

Thank you for your thoughts
murklys is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

All times are GMT -5. The time now is 04:24 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0