ABIT AL8 Intel Pentium 4/D Motherboard - i945P based LGA775 (Supports Pentium D - Dual Core), Intel Lakeport-P/Intel ICH7R Express Chipset, 1066/800/533MHz FSB, 4 x 240-pin DIMM up to 4GB, Supports Dual DDR2 667/533 Un-buffered Non-ECC memory, 1 x PCI Express x16 slot, 3 x PCI Express x1 slots, 2 x PCI, 6 x SATA connectors, S/PDIF In/Out, PCI-E GbE LAN, SATAII 300 RAID, supports RAID 0/1/10/5, USB2.0, IEEE1394, 7.1 channel High Definition Audio, ABIT µGuru technology (OC Guru/EQ/FlashMenu/BlackBox), CPU ThermalGuard, ATX form factor
# Available in 1GB to 2GB Dual Channel Kit
# PC5400 667MHz CAS 3-4-4-8
# 64x8 DDR2 FBGA Chips
# 240pin, Non-ECC, Un-buffered DDR2 SDRAM DIMM
# Aluminum Heat-spreader
# 6 Layers Ultra Low Noises Shielded PCB
# Retail Package
# Lifetime Warranty
# 1.8V - 2.4V Power Consumption
I would get the 2GB kit but they can't get it yet... As it is they are going to lend me a graphics card for 2 weeks until the GF7800 arives here in Australia.
Here is a question... I can always add another GB in the future as it is a 4GB board... (4 x 512 )
Will it use the Dual channel RAM first and then use the single channel if needed. Or does it all fall back to single channel mode when all slots are used ?