Originally Posted by KiingDavid
I decided to take apart the whole system and put it back together. First i tried powering on just thr motherboard. 4 lights on the board. Then i installed the cpu. There were 2 bent pins i was unaware of. Tried to power on same thing. I installed the system speaker and i got 3 beeps. Turns out i need to install memory. So i did. No more beeps. Installed gpu. No beeps no post
Beeping means motherboard is ok?
I also tried the psu in another machine and it was fine
4 lights mean the cpu is working in a 4 power phase
If i powered the pc with a couple cpu pins bent. Would that have fried my cpu anyway?
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Originally Posted by Mirageboss
Depends what you mean by "beeping". Are you referring to post, or a constant beep? Can you clarify how often/long the beep is as there is a wide range of "beep codes"
Thanks for ur reply
There is no post even when turned on with all the components
I tried to power on with just the cpu and gpu and the system gave me 3 medium length beeps, with equal length pauses in between. It did not repeat this until powered on again
Beeping stops when i install a dimm. Still no post