Re: No VGA!!!!!!!!!! Plz HELP
The monitor your using is a known working monitor right???
If it is known working then
i would suggest doing EXACTLY this.
the basics are
5.Videocard /unless you have onboard video
REMOVE the motherboard, place it on a Plastic surafce/ such as a rubber mat, or a large square of packing material.
plug the power supply into the board, ram, cpu, videocard. ONE thing at a time, double check and make sure everything is in place properly.
ok, take your case and move it by the board and plug the powerswitch onto the CORRECT pins on the motherboard.
Hook up the monitor to the back of the videocard, carefully, its not screwed down it can pop out easily..
press the power button.
Try the onboard video
Still no video?
try hooking up the small speaker in your pc to the CORRECT pins on the mobo to get a diagnostic beep code.
boot it again to see if you can hear beeps?
If you get this far with still no video, i would start replacing the Hardware.
Usually i start with the easiest things first. such as RAM, Videocard ect...
Keep us updated after you try this.
LambOfGod- Q6600 g0 @ 3.06 Ghz * DFI LANPARTY DK X48-T2RS * Antec 1200 * Rosewill RP550 PSU * EVGA 8800 GTX Superclocked *WD 74GB Raptor * 2 X Seagate 1TB 7200.11 (RAID 1) * 4 GB DDR2 1022 GSKILL 5-5-5-13 * Windows 7 Ultimate 64 bit/Windows XP 64 Bit