Re: Motherboard Problem
no its really not hard at all. Once you get into the bios you only have to change the voltage and the bus frequency. It is really only 2 settings. The frequency is going to be 533 not 1066 I was only saying that so that you werent looking for a 1066 setting. The motherboard I have for my Phenom II 920 has built in memtest so all I did was set them turn on the memtest feature and then hit F10 to save and exit and it would reboot and go right into memtest.
Your motherboard may have a different bios so I cant tell you the exact method to get to the things you need to change but the manual will have all the settings listed and will give you information about all of the different settings. I recommend you go through ALL of these settings just for your own personal benefit because it will give you the knowledge of all the features your board has to offer
Raidmax Smilodon Extreme Black Case -|-AMD Phenom II x4 955 BE @ 3829.50 Mhz (18.5 x 207, vcore 1.424, NB 2600 mhz, HT link 2200 mhz) -|- Xigmatek Dark Knight S1283V -|- Gigabyte MA790XT-UD4P Mobo -|- G. Skill 6Gb (3 x 2Gb) DDR3 1333 RAM 7-7-7-18-2t -|- WD Caviar 7200 RPM 1 TB HDD -|- OCZ GameXtreme 700W -|- Radeon 4870 1Gb @ 780/1050 -|- Asus VW202NR 20" wide-screen -|- Windows 7 Professional 64 Bit -|- Saitek Cyborg Keyboard -|- Razer Lachesis Mouse