Originally Posted by jetmir
I have a gamecube and I was wondering if it can be moded and where, if anybody knows i'd appriciate some sugestions.
I mod gaming stuff, so here pimp this out,
Get your game cube and all the list below, !!!YOU WILL NEED!!!:
Its plastic Spray, Very good for consoles
2 12inch Blue Cathode tubes
2 Uv DUSTFILTER
Glow Up Thum Screws
Rite it starts here, all that will cost about 50Pound
On your gamecube you will c some screws which take your Caseing of, well take all them out, once doing this you will have your gamecube Shell of, get the liquid sandpaper and spray it on the casing, get a clean wipe and wipe it down, then get your sandpaper and sand it down (Best to go over it twice) Then once doing this respray the liquid sandpaper onto the shell, then clean again with a clean cloth, spray your casing with the color of spray you just brought, then once doing this, leave the case for at least 24Hours to fully try off.
After 24 hours you will have to respray again, when you have resprayed it leave it for another 24Hours.
Once doing this heat a knife up from the cooker, once its really host knife a circle into each side of the case. (Making the knife hot will cut plastic easy and may take a good 10mins for each circle)
Once doing this glue the UV dust filter on each side were you cut the circle on each side.
Once doing all this get your casing back on, with the thum screws, screw it back on NOT REPLACING YOUR OLD SCREWS, replace with your Light up thumb screws.
After all that get your 2 cathodes sticks and place them on each side of the console at the top.
And after a very good 2days work on your Gamecube your ready to play.
If you do this you will wont to sell after you get fed up and your console will go for alot more then your brought it for on ebay.co.uk or .com
All this was put into my own words.
There will be no damage from what i have wrote there and it will not damage your gaming system, it will help the system to keep cool.