My current RAM setup, according to PC Wizard:
General Information :
CH_A (DIMM_A1) : 512 MB - DIMM
CH_B (DIMM_B1) : 512 MB - DIMM
Information SPD EEPROM () :
Manufacturer : PDP Systems
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-3200 (200 MHz)
Format : Regular RDIMM (133.35 x 3)
Size : 1024 MB (0 rows, 2 banks)
Module Buffered : No
Module Registered : No
Width : 72-bit
Error Correction Capability : ECC
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Manufacture : Week 0 of 2000
Supported Frequencies : 100 MHz, 100 MHz, 100 MHz
CAS Latency (tCL) : 3 clocks @100 MHz, 4 clocks @100 MHz, 5 clocks @100 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
Cycle Time (tRAS) : 4 clocks @100 MHz, 4 clocks @100 MHz, 4 clocks @100 MHz
Information SPD EEPROM () :
Manufacturer : PDP Systems
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-3200 (200 MHz)
Format : Regular RDIMM (133.35 x 3)
Size : 1024 MB (0 rows, 2 banks)
Module Buffered : No
Module Registered : No
Width : 72-bit
Error Correction Capability : ECC
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Manufacture : Week 0 of 2000
Supported Frequencies : 100 MHz, 100 MHz, 100 MHz
CAS Latency (tCL) : 3 clocks @100 MHz, 4 clocks @100 MHz, 5 clocks @100 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
Cycle Time (tRAS) : 4 clocks @100 MHz, 4 clocks @100 MHz, 4 clocks @100 MHz
Memory Controller Information :
Memory Controller : System Memory
Location : Mainboard
Error Correction Capability : Multi-bit ECC
Number of connectors : 4
Max. Module Size : 33554432 KB
I am currently interested in getting two of these. Will they work? And why are they so cheap in comparison to other 2GB sets?
General Information :
CH_A (DIMM_A1) : 512 MB - DIMM
CH_B (DIMM_B1) : 512 MB - DIMM
Information SPD EEPROM () :
Manufacturer : PDP Systems
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-3200 (200 MHz)
Format : Regular RDIMM (133.35 x 3)
Size : 1024 MB (0 rows, 2 banks)
Module Buffered : No
Module Registered : No
Width : 72-bit
Error Correction Capability : ECC
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Manufacture : Week 0 of 2000
Supported Frequencies : 100 MHz, 100 MHz, 100 MHz
CAS Latency (tCL) : 3 clocks @100 MHz, 4 clocks @100 MHz, 5 clocks @100 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
Cycle Time (tRAS) : 4 clocks @100 MHz, 4 clocks @100 MHz, 4 clocks @100 MHz
Information SPD EEPROM () :
Manufacturer : PDP Systems
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-3200 (200 MHz)
Format : Regular RDIMM (133.35 x 3)
Size : 1024 MB (0 rows, 2 banks)
Module Buffered : No
Module Registered : No
Width : 72-bit
Error Correction Capability : ECC
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Manufacture : Week 0 of 2000
Supported Frequencies : 100 MHz, 100 MHz, 100 MHz
CAS Latency (tCL) : 3 clocks @100 MHz, 4 clocks @100 MHz, 5 clocks @100 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 2 clocks @100 MHz, 2 clocks @100 MHz
Cycle Time (tRAS) : 4 clocks @100 MHz, 4 clocks @100 MHz, 4 clocks @100 MHz
Memory Controller Information :
Memory Controller : System Memory
Location : Mainboard
Error Correction Capability : Multi-bit ECC
Number of connectors : 4
Max. Module Size : 33554432 KB
I am currently interested in getting two of these. Will they work? And why are they so cheap in comparison to other 2GB sets?