Im So Frustrated Someone Plz Help!

[Tech N9ne]

hey guys i know i did a previous post but i need to ask somthing out and i hope somone will know the sloution. ok well my computer is being way to loud its insane the fan is clean and stuff but i can hear it like reving up and down when i open folders n stuff it never used to do this on my power supply it has a voltage rain that can go from 115 volts ( what its set to right now ) to 230 watts when i turn off my computer i switched it to 230 watts it runs soo quiet except my video card fan it keeps spninng really loud like when you start up the computer but it dosent stop like its supposed to and also my monitor wont start it says no singnal dected and my mouse and keyboard dont do anything there just off pretty much and i can see a red LED in the front of my case on and thats it

someone plzzz help!

 

[Deathstar1]

You are in the States yeah? where the mains voltage is 115v yeah? and you switched your psu to 230v yeah? You're lucky you didn't blow your psu/pc up totally.
That was a big no no.
Please give your pc spec's including m/board cpu, psu (amps on the 12v rail) video card, cooling, any third party fan control programmes etc

 

[Tech N9ne]

Field Value
Computer
Computer Type ACPI Multiprocessor PC
Operating System Microsoft Windows XP Home Edition
OS Service Pack [ TRIAL VERSION ]
Internet Explorer 6.0.2900.2180 (IE 6.0 SP2)
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name SHANE
User Name Shane McCrea
SMTP E-mail Address phantasia@shaw.ca
Logon Domain [ TRIAL VERSION ]
Date / Time 2006-04-28 / 14:09

Motherboard
CPU Type Intel Pentium 4, 3000 MHz (15 x 200)
Motherboard Name ECS PM800-M2 (3 PCI, 1 AGP, 1 CNR, 2 DDR DIMM, Audio, Video, LAN)
Motherboard Chipset VIA PM800
System Memory [ TRIAL VERSION ]
BIOS Type Award (03/18/05)
Communication Port Communications Port (COM1)
Communication Port ECP Printer Port (LPT1)

Display
Video Adapter RADEON X700 Series Secondary (256 MB)
Video Adapter RADEON X700 Series (256 MB)
3D Accelerator ATI Radeon X700 Pro (RV410)
Monitor BenQ FP71G [17" LCD] (15518003)

Multimedia
Audio Adapter Realtek ALC655 @ VIA AC'97 Enhanced Audio Controller

Storage
IDE Controller VIA Bus Master IDE Controller
SCSI/RAID Controller VIA SATA RAID Controller
Floppy Drive Floppy disk drive
Disk Drive SAMSUNG SP0802N (80 GB, 7200 RPM, Ultra-ATA/133)
Optical Drive HL-DT-ST CD-RW GCE-8526B (52x/32x/52x CD-RW)
SMART Hard Disks Status OK

Partitions
C: (NTFS) [ TRIAL VERSION ]

Input
Keyboard HID Keyboard Device
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse Microsoft USB Wheel Mouse Optical

Network
Primary IP Address [ TRIAL VERSION ]
Primary MAC Address 00-11-5B-14-BA-E9
Network Adapter VIA Rhine II Fast Ethernet Adapter (192. [ TRIAL VERSION ])

Peripherals
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB2 Controller VIA USB 2.0 Enhanced Host Controller
USB Device Microsoft USB Wheel Mouse Optical
USB Device USB Composite Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device

DMI
DMI BIOS Vendor Phoenix Technologies, LTD
DMI BIOS Version 6.00 PG
DMI System Manufacturer
DMI System Product PM800-8237
DMI System Version
DMI System Serial Number [ TRIAL VERSION ]
DMI Motherboard Manufacturer
DMI Motherboard Product PM800-M2
DMI Motherboard Version
DMI Motherboard Serial Number [ TRIAL VERSION ]
DMI Chassis Manufacturer
DMI Chassis Version
DMI Chassis Serial Number [ TRIAL VERSION ]
DMI Chassis Asset Tag [ TRIAL VERSION ]
DMI Chassis Type Desktop Case
DMI Total / Free Memory Sockets 2 / 0

thats the specs and the psu is a ATX 350 watt

 

[Deathstar1]

From that I can assume you have no third party coolers (e.g. Zalmans etc)
What are the amps on the 12v rail? (It should be on the sticker on the side of the psu)
To get this info via software I guess you managed to boot into windows, is this correct?
Also have you altered any fan speed controller settings in the bios or via a third party app like ATi Tool at all?

 

[Tech N9ne]

no i have no third party coolers and never have used one out it shows first off

output-- +3.3v +5v , +12v , -5v , -12v , +5VSB
max current-- 28A, 30A, 15A, 0.3A , 0.8a , 2.0A


the model if my PSU is PSIV-450-2 so you can check that out if i gave you some info you didnt need , and no i havent altred any fan speed controller settings in the bios

and to get the info i used everest to get the info and i dont know what via means sorry im not the best with computers

 

[Deathstar1]

via = using

You are now able to boot into windows yes?

EDIT: I have to go out for a while, I'll be back soon as I can

 

[Tech N9ne]

what do you meen boot into windows aint i already in windows?

 

[Tech N9ne]

yeah i gotta go out to soo i will talk to you later

 

[MikeReiner]

Thats intel stock coolers for ya. They always do that, it got so annoying that I went out and bought a 3rd party gigabyte fan. sooooo quiet and even cooler than the stock one was. I suggust you go out and buy a 3rd party CPU cooler

 

[borat_sagdiyev]

when i was still using windows a while back, my PSU fans would go crazy once in about 2 weeks. it doesnt do it anymore on mac.