Go Back   Computer Forums > General Computing > Hardware
Click Here to Login
Join Computer forums Today


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-20-2004, 07:36 PM   #1
Beta Member
 
Join Date: Jul 2004
Posts: 2
Unhappy Getting a nasty Error on start-up, need info

Im new to this forum, this is my first post and its not of a good nature unfortunately. I was installing camera software and had to download a driver from the business page. Upon installing it, and restarting my computer I started recieving this error and cannot find out what the problem is. Ive replaced the harddrive with a brand new one and tried to place the operating system back on it. It didnt work at all. I still recieved the same error. It goes to a blue screen and reads as follows:

***stop: oxoooooo8E(oxcoooooo5,oxoooooo45,oxF896cb74,0x0000 0000)

Page_fault_in_nonpaged_area


It saids a few other things, but I cannot remember what they are right off hand. Any help is appreciated. On top of that, any information on what this error is and where I can get information on fixing it is also greatly appreciated. Thanks.

(by the way, this is my sons computer =), just so no one wonders how I posted this message)

thanks again
__________________

johnnyyounce is offline   Reply With Quote
Old 07-20-2004, 09:25 PM   #2
Fully Optimized
 
CoMpUtaFrEek's Avatar
 
Join Date: May 2004
Posts: 1,765
Default Re: Getting a nasty Error on start-up, need info

I had a look on Yahoo! search for this kinda thing, I found information on slightly different error (x50) but you might want to try removing a stick of RAM, someone had issues running dual channel. What OS are you running? Is that the exact error you recieved? Because I cannot find anything matching exactly...
__________________

__________________
Asus A7N8X Deluxe - Rev 2.0 - Bios Ver. 1007
AMD Athlon XP-M 2200+ - @ 11x188 = 2Ghz (1.75Vcore)
ATi Radeon 9700 Pro (Almost as good as my old 5950U!)
Corsair 512MB XMS TwinX Low Latency DDR 400 - @ 188Mhz
3dmark03 Score: 5086
CoMpUtaFrEek is offline   Reply With Quote
Old 07-20-2004, 09:52 PM   #3
Beta Member
 
Join Date: Jul 2004
Posts: 2
Default

Im running Windows XP. The error may not be copied EXACTLY. But I will have a second look and see if I can get more info on it for you. I dont think it would be the RAM because we've had 2 256 sticks in there since we bought it. This started happening immediately after I downloaded the driver for my camera after installing the software. So, Im instantly set on that being the problem. Anyway, Ill try to get back to you with more info ASAP.
johnnyyounce is offline   Reply With Quote
Old 07-21-2004, 12:49 AM   #4
BSOD
 
bluto's Avatar
 
Join Date: Apr 2004
Posts: 1,542
Send a message via ICQ to bluto
Default Re: Getting a nasty Error on start-up, need info

Quote:
Originally Posted by johnnyyounce
Im new to this forum, this is my first post and its not of a good nature unfortunately. I was installing camera software and had to download a driver from the business page. Upon installing it, and restarting my computer I started recieving this error and cannot find out what the problem is. Ive replaced the harddrive with a brand new one and tried to place the operating system back on it. It didnt work at all. I still recieved the same error. It goes to a blue screen and reads as follows:

***stop: oxoooooo8E(oxcoooooo5,oxoooooo45,oxF896cb74,0x0000 0000)

Page_fault_in_nonpaged_area


It saids a few other things, but I cannot remember what they are right off hand. Any help is appreciated. On top of that, any information on what this error is and where I can get information on fixing it is also greatly appreciated. Thanks.

(by the way, this is my sons computer =), just so no one wonders how I posted this message)

thanks again
Thats well in good your at your sons,but why did you panic like this ?
My God it's only a camera and you replaced the hard drive and Windows?
Does this camera work at your sons ?
bluto is offline   Reply With Quote
Old 07-21-2004, 01:31 AM   #5
The Candyman
 
~mr mixx~'s Avatar
 
Join Date: Jun 2004
Location: USA
Posts: 11,310
Default Re: Getting a nasty Error on start-up, need info

Well it seems i don't understand this error either
but you can try devise manager to see if there is a conflict with the devise's.

To get there....click start/control panel/performance and maintenance/administrative tools/computer management/on the left side window double click devise manager....

If there is a conflict with one of those listed, you will see a yellow Quotation mark.
~mr mixx~ is offline   Reply With Quote
Old 07-21-2004, 09:33 AM   #6
Fully Optimized
 
CoMpUtaFrEek's Avatar
 
Join Date: May 2004
Posts: 1,765
Default Re: Getting a nasty Error on start-up, need info

Well you say its a fresh hard drive, so it cannot be anything to do with device installs, etc. I'd start taking bits from your sons computer and testing them in yours, in the order of RAM, CPU, Graphics.
__________________
Asus A7N8X Deluxe - Rev 2.0 - Bios Ver. 1007
AMD Athlon XP-M 2200+ - @ 11x188 = 2Ghz (1.75Vcore)
ATi Radeon 9700 Pro (Almost as good as my old 5950U!)
Corsair 512MB XMS TwinX Low Latency DDR 400 - @ 188Mhz
3dmark03 Score: 5086
CoMpUtaFrEek is offline   Reply With Quote
Old 07-21-2004, 10:13 AM   #7
In Runtime
 
TheSickness's Avatar
 
Join Date: Mar 2004
Posts: 370
Send a message via AIM to TheSickness Send a message via MSN to TheSickness Send a message via Yahoo to TheSickness
Default Re: Getting a nasty Error on start-up, need info

Quote:
Originally Posted by johnnyyounce
Im new to this forum, this is my first post and its not of a good nature unfortunately. I was installing camera software and had to download a driver from the business page. Upon installing it, and restarting my computer I started recieving this error and cannot find out what the problem is. Ive replaced the harddrive with a brand new one and tried to place the operating system back on it. It didnt work at all. I still recieved the same error. It goes to a blue screen and reads as follows:

***stop: oxoooooo8E(oxcoooooo5,oxoooooo45,oxF896cb74,0x0000 0000)

Page_fault_in_nonpaged_area


It saids a few other things, but I cannot remember what they are right off hand. Any help is appreciated. On top of that, any information on what this error is and where I can get information on fixing it is also greatly appreciated. Thanks.

(by the way, this is my sons computer =), just so no one wonders how I posted this message)

thanks again

Last time i saw this error it was a problem with the RAM, on your motherboard, how many RAM slots does it have? If it has more than 2 slots, take one of the sticks out and try placing it in another slot, worked for me
TheSickness is offline   Reply With Quote
Old 07-21-2004, 06:39 PM   #8
Fully Optimized
 
CoMpUtaFrEek's Avatar
 
Join Date: May 2004
Posts: 1,765
Default Re: Getting a nasty Error on start-up, need info

Yeh told ya, I expected RAM aswell, I had similar problems.
__________________
Asus A7N8X Deluxe - Rev 2.0 - Bios Ver. 1007
AMD Athlon XP-M 2200+ - @ 11x188 = 2Ghz (1.75Vcore)
ATi Radeon 9700 Pro (Almost as good as my old 5950U!)
Corsair 512MB XMS TwinX Low Latency DDR 400 - @ 188Mhz
3dmark03 Score: 5086
CoMpUtaFrEek is offline   Reply With Quote
Old 07-21-2004, 07:50 PM   #9
In Runtime
 
TheSickness's Avatar
 
Join Date: Mar 2004
Posts: 370
Send a message via AIM to TheSickness Send a message via MSN to TheSickness Send a message via Yahoo to TheSickness
Default Re: Getting a nasty Error on start-up, need info

Quote:
Originally Posted by CoMpUtaFrEek
Yeh told ya, I expected RAM aswell, I had similar problems.
Yeah, usually its either caused by the RAM being seated wrong, or the slot being screwed, either that or the memory has just screwed
TheSickness is offline   Reply With Quote
Old 07-21-2004, 07:53 PM   #10
Fully Optimized
 
CoMpUtaFrEek's Avatar
 
Join Date: May 2004
Posts: 1,765
Default Re: Getting a nasty Error on start-up, need info

Or RAM incompatibility
__________________

__________________
Asus A7N8X Deluxe - Rev 2.0 - Bios Ver. 1007
AMD Athlon XP-M 2200+ - @ 11x188 = 2Ghz (1.75Vcore)
ATi Radeon 9700 Pro (Almost as good as my old 5950U!)
Corsair 512MB XMS TwinX Low Latency DDR 400 - @ 188Mhz
3dmark03 Score: 5086
CoMpUtaFrEek is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 09:14 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0