FlightSimBoy
Fully Optimized
- Messages
- 2,114
So, where was the short at? Lol, glad you got that fixed.
When overclocking, push your FSB as high as you can get it to be stable at the lowest voltage possible, but I wouldn't lower voltages below stock settings, because that will probably reduce stability. You must also be sure it is thermally stable at this setting as well, and stress test with Orthos, Prime95 or any other "CPU Stresser" to see if it truly is stable.
When overclocking, push your FSB as high as you can get it to be stable at the lowest voltage possible, but I wouldn't lower voltages below stock settings, because that will probably reduce stability. You must also be sure it is thermally stable at this setting as well, and stress test with Orthos, Prime95 or any other "CPU Stresser" to see if it truly is stable.