fixing usb plug/wire

[mtotho]

My logictec mini reciever broke. This is the wireless adapter that recieves the signals from the wireless keyboard and mouse. It is a device about 3 inches long and resemble a usb thumb drive. it was sitting in my laptop, i moved my laptop.. not calculating for the space required for the 3 inch reciever and it bent all the way up. It no longer recieves a signal. I took off the metal usb plug, the part that physically goes into the usb slot(the male part). I am left with a green pcb with 4 metal bars. I assume each bar is assigned to one of the 4 usb colored wires.. my problem is, and is what i am here to ask, which bar goes with with color? It is standard on all usb cables i assume. i picture is a must. Thanks

 

[borat_sagdiyev]

http://pinouts.ru/Slots/USB_pinout.shtml

Pin Name Color Description
1 VCC Red +5 VDC
2 D- White Data -
3 D+ Green Data +
4 GND Black Ground

 

[mtotho]

thanks, that is exactly what i needed.

 

[lhuser]

And be careful. Unbend slowly. If not, you may end up breaking it!