Emachine Problem

[Remeniz]

You should have one beep at least, like it did before. Make sure the RAM is in place.

Also tell me if your CPU fan is spinning and if the fan itself is clean?

 

[IAntDemo]

on your motherbored find the 3-pin jumper near the battery, labeled "clear cmos" or "reset bios", should be like this: http://www.nordichardware.com/skrivelser_img/432/cmos.jpg

ok now remove the jumper from the default position, replace the jumper to connect to the 2nd and 3rd pins, now turn on your pc, wait a min, then put the jumper back on to the pins where it was first, before doing this take your power lead out, anyway if its not that you could try making sure nothing is loose and maybe take a pic of it up close.