Ran Prime95 today, it went for 4 hours and 51 minutes, then gave me an error. I think that's acceptable, and I know the problem either has to do with my RAM or the CPU voltage. It is running on 1.4 volts, which is the high end of the stock voltage. I could easily bump this up a bit, and I'm sure my errors would not come that soon (or at all). I think it'll be okay, but I might consider tomorrow upping it to 1.425 volts and see if that helps. I also might bump up the RAM voltage from 2.7 to 2.725, I think that would help as well. My RAM can take up to 2.85 volts, so I'm definitely in the clear in that respect.
Maximum temperature was 51 degrees Celsius on my CPU. Sad to go above 50, since that's so nice, but I'm definitely still in the clear. Not to mention I'm really not looking to overclock past 2.8 GHz, because I don't think the CABJE core will hit 3 GHz regardless of anything. With a better heatsink, it might, but I don't think so.
My PSU behaved nicely, though. Never dropped below 11.30 and hit 11.45 maximum. I know that isn't very good, but at least it wasn't as bad as yesterday. It, however, is keeping everything else very stable. For a 60 dollar PSU, it really is not bad at all. Holds up my system well so far, but the next PSU I buy will be one of a little higher quality.