Go Back   Computer Forums > General Computing > Hardware
Click Here to Login
Join Computer forums Today


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-01-2008, 07:49 AM   #61
Golden Master
 
worshipme's Avatar
 
Join Date: Oct 2007
Posts: 5,603
Default Re: CPU Max Temperatures

My Q6600 runs at 60c on two of the cores when running Prime95 @ 3.45GHz, temps can get as high as 70c @ 3.6GHz, that's why I'm hoping to get a better HSF or an E8400.
__________________

__________________
AMD Phenom II X4 955 BE @ 4.0GHz + TU120E lapped - MSI 770-CD45 AM3 - 2x2GB OCZ DDR3 1333MHz - Sapphire HD 4870 - Samsung Spinpoint 500GB 7200RPM 16MB cache HDD - Tagan TG600-BZ Piperock - (Currently open test bed) - Windows Vista Home Premium 64bit.
worshipme is offline   Reply With Quote
Old 05-01-2008, 08:03 AM   #62
Fully Optimized
 
Bobert93's Avatar
 
Join Date: Dec 2007
Posts: 2,449
Default Re: CPU Max Temperatures

lol this was from, august
__________________

__________________
(ASUS P5E X38)__(Q6600@3.4Ghz)__(Innod3D 8800GTS 512Mb 800/1920)__(4Gb corsair XMS2 800Mhz)__(Antec 900)__(Vista 64Bit)_(Zalman 9700)
{3DMark06 15211}
Bobert93 is offline   Reply With Quote
Old 05-01-2008, 10:11 AM   #63
Golden Master
 
worshipme's Avatar
 
Join Date: Oct 2007
Posts: 5,603
Default Re: CPU Max Temperatures

It's a sticky.
__________________
AMD Phenom II X4 955 BE @ 4.0GHz + TU120E lapped - MSI 770-CD45 AM3 - 2x2GB OCZ DDR3 1333MHz - Sapphire HD 4870 - Samsung Spinpoint 500GB 7200RPM 16MB cache HDD - Tagan TG600-BZ Piperock - (Currently open test bed) - Windows Vista Home Premium 64bit.
worshipme is offline   Reply With Quote
Old 05-01-2008, 10:25 AM   #64
Fully Optimized
 
Join Date: Dec 2007
Location: England
Posts: 3,390
Default Re: CPU Max Temperatures

Quote:
Originally Posted by worshipme View Post
My Q6600 runs at 60c on two of the cores when running Prime95 @ 3.45GHz, temps can get as high as 70c @ 3.6GHz, that's why I'm hoping to get a better HSF or an E8400.
Woah. They're high. I'm gonna watercool when I upgrade.
__________________
Lenovo ThinkPad T410 - i7 620M - 8GB RAM - Crucial M4 120GB SSD - 250GB 2nd drive - Intel HD 3000 GPU - 1440x900 - Windows 7/8
REMENIZ Computers
Remeniz is offline   Reply With Quote
Old 05-01-2008, 11:16 AM   #65
Golden Master
 
worshipme's Avatar
 
Join Date: Oct 2007
Posts: 5,603
Default Re: CPU Max Temperatures

Not really, 60c is safe and 70c is Intel's specified max safe temperatures. So I'm not worried, just I need better cooling to push it further.
__________________
AMD Phenom II X4 955 BE @ 4.0GHz + TU120E lapped - MSI 770-CD45 AM3 - 2x2GB OCZ DDR3 1333MHz - Sapphire HD 4870 - Samsung Spinpoint 500GB 7200RPM 16MB cache HDD - Tagan TG600-BZ Piperock - (Currently open test bed) - Windows Vista Home Premium 64bit.
worshipme is offline   Reply With Quote
Old 05-01-2008, 12:50 PM   #66
Fully Optimized
 
LambOfGod's Avatar
 
Join Date: Sep 2006
Posts: 1,783
Send a message via MSN to LambOfGod
Default Re: CPU Max Temperatures

Quote:
Originally Posted by worshipme View Post
Not really, 60c is safe and 70c is Intel's specified max safe temperatures. So I'm not worried, just I need better cooling to push it further.
Mine are at just under or 40C load, not lapped. Q6600 @ 2.6 GHZ stock voltage.

I didnt want to mess with voltage much with my system.

So when i pushed the FSB to 1333 (3.0 GHZ) @ stock voltage. My system would fail one instance of Prime 95 after about 10 Mins.... so I kept pushing it down, 2.6 was where i ended..

B3 stepping BTW... what do you think about that worshipme?
What voltage are you pushing through your CPU?
__________________
LambOfGod- Q6600 g0 @ 3.06 Ghz * DFI LANPARTY DK X48-T2RS * Antec 1200 * Rosewill RP550 PSU * EVGA 8800 GTX Superclocked *WD 74GB Raptor * 2 X Seagate 1TB 7200.11 (RAID 1) * 4 GB DDR2 1022 GSKILL 5-5-5-13 * Windows 7 Ultimate 64 bit/Windows XP 64 Bit
LambOfGod is offline   Reply With Quote
Old 05-01-2008, 01:51 PM   #67
Golden Master
 
worshipme's Avatar
 
Join Date: Oct 2007
Posts: 5,603
Default Re: CPU Max Temperatures

My P5K is pencil modded so I don't need quite as much Vcore because Vdroop is non-existant on my board. I run 1.375V @ 3.4GHz and 1.4375V @ 3.6GHz, make sure you have the CPU PLL voltage set to 1.7V and CPU and PCI-E spread spectrum disabled. You might need to bump up the FSB termination and north bridge voltages a bit too if you increase the FSB speeds. I'd say you'd probably need about 1.325V to do 3.0GHz with a B3 but it also depends on your motherboard and what your Vdroop is like.
__________________
AMD Phenom II X4 955 BE @ 4.0GHz + TU120E lapped - MSI 770-CD45 AM3 - 2x2GB OCZ DDR3 1333MHz - Sapphire HD 4870 - Samsung Spinpoint 500GB 7200RPM 16MB cache HDD - Tagan TG600-BZ Piperock - (Currently open test bed) - Windows Vista Home Premium 64bit.
worshipme is offline   Reply With Quote
Old 05-01-2008, 05:05 PM   #68
Fully Optimized
 
A True Folder's Avatar
 
Join Date: Jan 2007
Posts: 2,789
Default Re: CPU Max Temperatures

Are you guys using TjMax of 100C in either Core Temp and or Real Temp?

I have gone back to my quad in this box.

3.2GHz @ 1.24375v 50-50-48-48 Prime95 Blend (best stability) ambient air temp 22C

3.6GHz @1.4v 59-59-57-57 Prime85 Small FFT (hottest temps) ambient air temp 19C

Looking at an X3360 next if I can squirrel away the $$$ without the Mrs noticing

__________________
E8600@ 4.25GHz, 1.325V | Thermalright Ultra 120 eXtreme + Scythe Slipstream 120 | Asus Rampage Extreme| 4GB Corsair 2000MHz 8-8-8-24 @ 1600 6-7-6-24| ASUS 9800GTX| Pioneer 18X SATA DVD-RW | 320GB + 500GB WD SATAII | Antec True Power Trio 650W | Thermaltake Sonata | Vista Ultimate x64 SP2/Win7 Ultimate
A True Folder is offline   Reply With Quote
Old 05-01-2008, 05:27 PM   #69
Golden Master
 
worshipme's Avatar
 
Join Date: Oct 2007
Posts: 5,603
Default Re: CPU Max Temperatures

I am using a TjMax of 100c, just to be safe like you said. Why have you gone back to your quad BTW? And let me know how the E3110 does on the P5K.
__________________
AMD Phenom II X4 955 BE @ 4.0GHz + TU120E lapped - MSI 770-CD45 AM3 - 2x2GB OCZ DDR3 1333MHz - Sapphire HD 4870 - Samsung Spinpoint 500GB 7200RPM 16MB cache HDD - Tagan TG600-BZ Piperock - (Currently open test bed) - Windows Vista Home Premium 64bit.
worshipme is offline   Reply With Quote
Old 05-01-2008, 06:51 PM   #70
Fully Optimized
 
A True Folder's Avatar
 
Join Date: Jan 2007
Posts: 2,789
Default Re: CPU Max Temperatures

I got sick and tired of the stuck temperature sensors on the E3110, nothing wrong with the cpu, it ran fine, just one of the numerous 45nm chips that have the sensor bug.

Using Real Temps sensor test I was only getting movement of ~3 so the reported temps bore no real resemblence to actual temps at stock clocks/low load usage which was just plain annoting, so being as it is a server chip I think I'll turn the P5K box into a file server. I'm sure I have a copy of server 2003 somewhere, might even give that a try.

The E3110 has been working in the P5K, I had to update the bios iirc (I'll check what it's running after work) but it is currently sitting idle awaiting a video card, my 9800GTX should be here this afternoon or early next week which will free up the 8800GTS 640MB currently in my pc to go into the P5K box, then she'll be up and running.
__________________

__________________
E8600@ 4.25GHz, 1.325V | Thermalright Ultra 120 eXtreme + Scythe Slipstream 120 | Asus Rampage Extreme| 4GB Corsair 2000MHz 8-8-8-24 @ 1600 6-7-6-24| ASUS 9800GTX| Pioneer 18X SATA DVD-RW | 320GB + 500GB WD SATAII | Antec True Power Trio 650W | Thermaltake Sonata | Vista Ultimate x64 SP2/Win7 Ultimate
A True Folder is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 03:28 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0