Originally Posted by ssc456
lols tell me he hasnt got the jumper set to reset the bios and has bus left it that way,
that would b e so funny but easily done, have a look a your mobo manual see which 2 pins the jumper should be on for reset bios and normal
Yea. Bus can be funny like that. Messing around with the mobo and stuff.
Can I just confirm that the ATX connector on the Mobo is the 20 pin type. If it's the 24 pin type then you must use the 20 and the 4 pin together on the 24 pin ATX plug.
However if your system was running fine before the PSU gave up then it's very likely that the PSU took your Mobo to the grave with it.