can't open external hard drive

[allears88]

I cant open my hard drive. this always shows up"There was a problem starting ~$WPXQJZR.FAT32 The specified module could not be found". help! i need a fix! thanks and God bless

 

[Fujitsu_Technician]

what verson of windows are you running?

 

[allears88]

windows 7 ultimate 32 bit

 

[allears88]

Capture_zpsbbf5ba0c.png Photo by allears88 | Photobucket this shows up

 

[XPikachu]

Looks like a corrupt file table.

You may have to delete the partition - the RAW data will be safe, then use a data recovery tool to get the data off.

Try that.

 

[setishock]

Go to the maker of the drive's website and download the drivers. You need that dll file and windows doesn't appear to have it on board.

 

[Fujitsu_Technician]

Go to the maker of the drive's website and download the drivers. You need that dll file and windows doesn't appear to have it on board.

yes get the drivers for it and install them this should correct this problem.
if it does not correct the problem I would suggest doing a chkdsk in command prompt under the drive letter this has worked in the past.

Kind Regards