Heres a full list of the beep codes and solutions from AMIBIOS website.
Number of Beeps Description
1 Memory refresh timer error.
2 Parity error in base memory (first 64KB block)
3 Base memory read/write test error
4 Motherboard timer not operational
5 Processor error
6 8042 Gate A20 test error (cannot switch to protected mode)
7 General exception error (processor exception interrupt error)
8 Display memory error (system video adapter)
9 AMIBIOS ROM checksum error
10 CMOS shutdown register read/write error
11 Cache memory test failed
8.2.1 Troubleshooting POST BIOS Beep Codes
Number of Beeps Troubleshooting Action
1, 2 or 3 Reseat the memory, or replace with known good modules.
4-7, 9-11 Fatal error indicating a serious problem with the system. Consult your
system manufacturer. Before declaring the motherboard beyond all
hope, eliminate the possibility of interference by a malfunctioning
add-in card. Remove all expansion cards except the video adapter.
• If beep codes are generated when all other expansion cards are
absent, consult your system manufacturer’s technical support.
• If beep codes are not generated when all other expansion cards are
absent, one of the add-in cards is causing the malfunction. Insert
the cards back into the system one at a time until the problem
happens again. This will reveal the malfunctioning card.
American Megatrends, Inc.
Checkpoint & Beep Code List 1.71
Copyright 2005 Page 16 of 16
8 If the system video adapter is an add-in card, replace or reseat the
video adapter. If the video adapter is an integrated part of the system
board, the board may be faulty.
Ah well nevermind, its sorted lol