Let me say that the case is hard to wire out of the box. The latest revision adds a couple of holes next to the drive cages, so that will help a little bit. I cut out some holes to help with the wire management, and it helped a ton. If you are willing to get into modding this case if you get it, look at this thread:
Also I ordered a drive cage so I could run 3 120MM fans on the front, it only comes with 2 from the factory. If you do this, you will have to get an external CD drive or buy a external case for the one you have.
Edit: The only problem that I have with the PSU at the bottom is it's harder to hide wires. Some people cut a hole below it and flip the PSU, but I'm not sure if I want to do that, since it's harder for it to get air from such a small space unless you raise the case. Then it looks goofy IMO.
The red glow is from a red CCFL tube.