Originally Posted by nieuwsma
Hey, so i have a raptor that i was using in my first build, that i want to transfer to my most recent build. How would i go about adding the old hd to my new setup? i have it all hooked up, with power, and the dang ide cable
but do i need to partion it? or how do i go about it. I need the extra 200gigs!! thanks.
If you've got any other IDE drives/hdds, make sure you have the jumper (on the hdd) set to the correct setting in relation to it's position (slave or master) on the IDE cable. Or, you can just use the jumper option "CS" for cable select.
BTW: Sorry if you already have it working, but I'm not sure if you do or not...your wording seemed odd. If it is working, then follow ARs instructions for formatting above.
Intel Core i7-2600K @ 3.4GHz || GIGABYTE GA-Z68X-UD3P-B3 || Corsair Vengeance 16GB DDR3-1600 || EVGA GeForce GTX 480 || Samsung EVO 256GB SSD
my feet get cold and that gives me diarrhea sometimes - Smart_Guy