Would This Setup Work?

SkittelzXD

Solid State Member
Messages
7
Im upgrading my computer and was wondering if this would work well.

Seagate - Barracuda 1TB Internal Serial ATA Hard Drive

Intel® - Core™ i5-2300 Quad-Core 2.8GHz Processor

Intel® - Media Series ATX Motherboard 1066/1333MHz (Socket 1155)

Corsair - Vengeance 2-Pack 4GB DDR3 DIMM Desktop Memory Kit

PNY - GeForce GTX 560Ti 1GB GDDR5 PCI Express Overclocked Graphics Card

OCZ StealthXStream 600-Watt Power Supply


This is a pretty massive upgrade and costly one too so i want to make sure everything will work together without any problems.

Thanks
 
thanks for the answer but i have one more question, the RAM getting says up to 1600mhz and my motherboard only goes up to 1333mhz. will the RAM stop at 1333 or will it try operating at 1600. Im not to familiar with ram so sorry if this is a stupid question
 
It depends on if your motherboard allows for overclocking the RAM. Look in the BIOS. RAM will still run at the lower speed if overclocking is not an option.
 
I dont own the motherboard so i cant get into the BIOS. so ill assume that the motherboard wont let the RAM get any higher then 1333mhz? i wasnt looking at overclocking the RAM
 
Don't worry about the RAM being rated for 1600MHz, it will still run fine at the speed supported by the motherboard.
 
Back
Top Bottom