LukaszR1
Fully Optimized
- Messages
- 2,833
Well, i opened up my computer the other day to install and extension cord for the 8-pin ATX plug. I install it...closed up the case, powered on the machine and the computer runs like it did before, but my monitor now doesn't come out of standby mode....aka i don't see anything on the screen, but there is a small light flashing which it does indicating standby mode.
So i think the cable might be faulty, so i un-install it and plug everything back in exactly how it was before i opened it. I turn on the PC, and it runs as it did before...but again the monitor still does the same thing.
I am clueless as to why its not working now. I was playing on it perfectly fine before i went about installing the cable...and now i'm at a loss at how to fix this.
Does anyone know what could be causing this problem? i can't supply more info on what i did...cause exactly how i wrote above...i simply touched one cable in the entire PC, no other piece of hardware...so i'm abit lost.
Someone please help me out. Computer specs below, Monitor is the Samsung T220 - 22" using the DVI adapter.
So i think the cable might be faulty, so i un-install it and plug everything back in exactly how it was before i opened it. I turn on the PC, and it runs as it did before...but again the monitor still does the same thing.
I am clueless as to why its not working now. I was playing on it perfectly fine before i went about installing the cable...and now i'm at a loss at how to fix this.
Does anyone know what could be causing this problem? i can't supply more info on what i did...cause exactly how i wrote above...i simply touched one cable in the entire PC, no other piece of hardware...so i'm abit lost.
Someone please help me out. Computer specs below, Monitor is the Samsung T220 - 22" using the DVI adapter.