My overclock

[Mikey1]

OK here is the thing........... I used Easy Tune 4 and only overclocked like .2

Yea i know it sucks but how high do u think i can get it........here is what it is at now.

Multiplier.......11
System Bus..............219

went from 2200 mhz to 2408.82 mhz

 

[borat_sagdiyev]

is it stable at the moment?

 

[Mikey1]

yea perfectly stable..........the temps are fine too

 

[borat_sagdiyev]

now keep going up by .1 and keep checking temperatures. if you suspect anything suspicious, go back down to 2.4 immediately

 

[Mikey1]

how high do u think i can take my bus? do i want to touch the multiplier?

 

[Ð88]

It's really hard to say how high you can go. It seems that it is different for everyone. Everything depends on your hardware as well as the settings you decide to use (as there a lot of combinations). Just keep raising it up like you already have until you experience instability, then drop it back down a little bit until it is stable again.

 

[Mikey1]

should i touch the multiplier at all?what bout the voltage

the cpu is at 1.600 voltage
and the dram is at 2.800 voltage

 

[Gamingfreak]

its better to use the motherboards bios for overclocking, 1.6v? thats pretty high

 

[Mikey1]

what should the voltage be at? 1.4 maybe 1.5?

 

[G35x]

Voltage should be at 1.5... My 3400 is at 1.5 volts.