G Gamingfreak Fully Optimized Messages 2,160 Nov 28, 2005 #1 i have a comp which im fixing up so i can sell it i have a P4 2.8GHz 533fsb cpu in it with 512mb ddr 400 ram and for some reason the fsb is at 133 y is this?
i have a comp which im fixing up so i can sell it i have a P4 2.8GHz 533fsb cpu in it with 512mb ddr 400 ram and for some reason the fsb is at 133 y is this?
L lhuser Golden Master Messages 13,147 Nov 28, 2005 #2 which FSB? The memory? If so, well...these board don't support DDR400...so it is clocked down at DDR266 or whatever (Not DDR333)
which FSB? The memory? If so, well...these board don't support DDR400...so it is clocked down at DDR266 or whatever (Not DDR333)
OP OP G Gamingfreak Fully Optimized Messages 2,160 Nov 28, 2005 #3 well in everest it says the ram is running at 200mhz which it should be but it says the fsb is 133mhz which i dont understand, could everest be wrong?
well in everest it says the ram is running at 200mhz which it should be but it says the fsb is 133mhz which i dont understand, could everest be wrong?
A AOD In Runtime Messages 348 Nov 29, 2005 #4 yea maybe, but it could just be set that way in bios check what it says in the bios.
L lhuser Golden Master Messages 13,147 Nov 29, 2005 #5 Yeah, most of the time the instructions could be wrong. There is no Intel P4 that will run under a 400MHZ FSB....unless you have the socket 423
Yeah, most of the time the instructions could be wrong. There is no Intel P4 that will run under a 400MHZ FSB....unless you have the socket 423