COOLER MASTER COSMOS S 1100 Fans Replacement/LCD display?

[Zer0Cool]

Here are the parts that I will most likely be ordering this week for my new build;

1st Case: COOLER MASTER Cosmos S 1100
2nd PSU: Tagan BZ Series BZ800 (800W)
3rd Case Fan's: Scythe S-Flex

Wile I'm waiting for Q9450 & 9800 GTX I think it will be wise to make sure that I am satisfied with the rest of my components by ordering the parts above. I noticed that on coolermaster website they say that there 120mm fans will produce only 17dba with 1200rpm's which is great, but I'm not sure about there airflow… That is why I most likely will be replacing all my stock case fans with “Scythe S-Flex” fans, what do u guys think? I know that I will need at least 4 120mm fans, 3 on top & one in the back. The one in the front that comes with the case has a red led to it, so I might keep it; it looks cool unless someone can suggest a better one? Am I missing any other fan spots? By looking at that case it has 2 air vents in the bottom, can I mount 2 fans in there as well? Or is it just a vent? Here is the link to the case; http://www.newegg.com/Product/Product.aspx?Item=N82E16811119150

What I'm trying to accomplish is silence and GREAT air flow at the same time. I will @ all my system so cooling is important. Is Scythe S-Flex a good choice? There are 2 S-Flex types' fans on Newegg; What do u guys think would be the best fan for me? Should I get all of the same fans? Or should I mix it up?

Fan Size 120mm http://www.newegg.com/Product/Product.aspx?Item=N82E16835185005
RPM 1200 RPM
Air Flow 49.0 CFM
Noise Level 20.1dBA
Power Connector 3-pin (4-pin adaptor included)

Fan Size 120mm http://www.newegg.com/Product/Product.aspx?Item=N82E16835185006
RPM 1600 RPM
Air Flow 63.7 CFM
Noise Level 28.0 dBA
Power Connector 3-pin (4-pin adaptor included)

Also I will be getting “Power Supply 3 Pin Fan Extension” just incase; http://www.newegg.com/Product/Product.aspx?Item=N82E16812189006

So what do u guys think? Are this Fans any good? Should I get more then 4 fans? Also does anyone know if that 200mm fan on the side of the case any loud? I also want to put a nice fan controller in there something cool looking with a nice lcd display, something like "AeroCool CoolWatch Fan Controller” what ya guys think?

Thanks

 

[culexor]

well since they took out the acoustic foam in the s version you will hear much more noise from the system, if you were to get the standard cosmos 1000, i would say go ahead and get the higher rpm fan, but with the s, i suggest you get one of the two quieter ones because you will hear more with that giant mesh thing on the side, and there's already a fat fan on the side of it, you will not need a huge amount of additional airflow. so i say get one of the two lesser rpm fans, but if you decide to go with the quietest fan, i say stick with stock cooling, the stock fans will be close to the same as the lesser rpm fan that you chose.

 

[Zer0Cool]

well since they took out the acoustic foam in the s version you will hear much more noise from the system, if you were to get the standard cosmos 1000, i would say go ahead and get the higher rpm fan, but with the s, i suggest you get one of the two quieter ones because you will hear more with that giant mesh thing on the side, and there's already a fat fan on the side of it, you will not need a huge amount of additional airflow. so i say get one of the two lesser rpm fans, but if you decide to go with the quietest fan, i say stick with stock cooling, the stock fans will be close to the same as the lesser rpm fan that you chose.

Thanks for that info cornholio.

Does anyone else have something to say about this...?