|
|
#1 |
|
Beta Member
Join Date: Nov 2010
Posts: 2
|
I just bought a Pentium 4 3.0E and my current motherboard won't support it. I need a Socket 478 motherboard with at least 4 PCI slots and 1 AGP 8x slot. It also needs 800 mhz FSB and DDR2 support. Thanks!
maybe 3 PCI and DDR... ATX |
|
|
|
|
|
#2 |
|
Baseband Member
Join Date: Dec 2010
Posts: 55
|
I have one that is from an HP desktop that I lost the HDD to (failure not lost). 3 PCI, 1 AGP 8x, 2 SATA 150 ports (most SATA 300 are backwards compatible.), 2 IDE/PATA ports, 1 FDD port, 20 Pin main, 4 pin CPU power, 4 x DDR up to 1GB per slot. Ran Win 2000 (my preference) and Win XP Pro (factory) equally well with 1.5 GB of ram and 2.66 HT P4 (800/1mb). The board itself is an ASUS P4LD with locked BIOS, but that probably could be fixed via flashing the BIOS from the ASUS site. I never tried because I was happy with the processor at stock, thus no need for OC BIOS settings.
PM with an offer if you want it, or have any questions.
__________________
IBM laptop and HP laptop (junk when started, everything is branded now). Main toys: 78 K20. 400SBC Dual Quads, Muncie 4 speed, NP 205, Dana 60's at both ends with 4.11 gears. 86 F250. 540 horse crate 460 and ZF6. Dana 70 rear with 3.73 gears. dual stacks to vent the dual quads lol. |
|
|
|
|
|
#3 |
|
In Runtime
Join Date: Nov 2010
Posts: 140
|
i have a socket 478 motherboard that has the good old AGP x8 i think 3 pci slots but only dd1 ram, where is your location
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|