Kramer VGA/XGA RECEIVER ( TWISTED PAIR ) TP-20
This iteam is worth £530Vat And im sell for just £310inc P&P. This is an absolute bargin its still in original packageing. There is no wires included but you could pick all them up for about £10. This is a bargin..
The Kramer TP-19/TP-20 is a sophisticated, extendable and branching set of VGA/XGA-to-Twisted Pair Transmitter and Receiver. The TP-19, the transmitter, has a looping XGA input, ID bit control and two CAT5 outputs, each with its own cable EQ. control, allowing it to send signals to two different locations simultaneously. It offers cable equalization and signal amplification of the VGA/XGA signal, up to distances exceeding 300 ft. (100 meters) using simple CAT5 unshielded wire (UTP). The TP-20 receives the CAT5 signal, decodes it simultaneously to three XGA HD15 outputs (DA operation) and relays the input to the next receiver (transceiver operation).
It provides two independent, front panel accessible EQ. controls ? one for the decoded XGA signal and one for the signal re-transmitted to the next receiver. Both machines are desktop, half 19?, size, so that the two machines can be mounted side by side in a 19? 1U high rack adapter. The input looping capability of the TP-19 and the transceiving ability of the TP-20, create a multimode XGA/CAT5 distribution system.
Technical Specifications TP-20
INPUTS: CAT5 on an RJ45 connector (TP-20).
OUTPUTS: 3 x VGA (Analog R, G, B, 0.7 Vpp/75 ?s, Hs, Vs, TTL level) on HD15 connectors + 1 line driver for CAT5 on RJ45 connector
MAX. OUTPUT LEVEL: 1.5 Vpp / 75 ?
BANDWIDTH (-3dB): 155 MHz.
DIFF. GAIN: 0.67 deg.
K-FACTOR: < 0.7 %
S/N RATIO: 64.5 dB
CONTROLS: Cable EQ.: 0 to +4dB @ 5.8 MHz
POWER SOURCE: 9.6 VA
DIMENSIONS: 22cm x 18cm x 4.5 cm (8.7? x 7? x 1.7?) W, D, H, (half 19?, 1U).
WEIGHT: 1.3 kg (approx.), 2.9 lbs, each TP-19 or TP-20.
ACCESSORIES: Power cord
OPTIONS: 19? rack adapters RK-80 (holds two units)