I have windows 3.1 on DOS 7.10 and recently had run an experiment on redirection with ECHO.In the AUTOEXEC.BAT I had extended the echo of CTMOUSE.EXE to LOCKDRV.BAT by taking teh echo. from that batch file and redirecting it through RTM.EXE or some other program--I cant remember--but anyways when i boto CTMOUSE recognizes the com and port an IRQ but does not respond.
Now Iw as thinking Debuug would be the safest method of resetting the registers of COM1 or COM2 - I would like to install Windows 3.111 or WIn 95 but cannot w/o mouse support-setup does not recognize teh ports in its protected mode GUI interface - probably because of teh CPU built in VCPI to which discredits EMM386 NOVCPI-the CPU has built in VCPI to its BIOS and cannot be controlled.
How is it possible to do a simple disassembly of the port and then reset the originatign values.I am a novice at debug and have experiemtned int eh past but have no real general knowledge on resetting the ports as the bit settings is what I dont have-as aI dont have a DOS 710 manual.
Somebody please respond to this.....................
Now Iw as thinking Debuug would be the safest method of resetting the registers of COM1 or COM2 - I would like to install Windows 3.111 or WIn 95 but cannot w/o mouse support-setup does not recognize teh ports in its protected mode GUI interface - probably because of teh CPU built in VCPI to which discredits EMM386 NOVCPI-the CPU has built in VCPI to its BIOS and cannot be controlled.
How is it possible to do a simple disassembly of the port and then reset the originatign values.I am a novice at debug and have experiemtned int eh past but have no real general knowledge on resetting the ports as the bit settings is what I dont have-as aI dont have a DOS 710 manual.
Somebody please respond to this.....................