KiingDavid
Baseband Member
- Messages
- 48
Hi guys. I was playing farcry 3 when my computer just crashed and would not boot (no power) so i initially thought it was a problem with the psu. I decided to open up my case to clear some dust incase it was an overheating issue.
I didnt wanna dust in my computer room so i brought it to the basement where 2 things went wrong. First, i tipped it over and second i tried to detach the cpu fan when the whole thing just came off. Including the cpu with the cpu latch still down. I examined the pins on the cpu and it seemed ok. Was able to socket back in without too much effort.
After i finished dusting i tried to power on and i could see lights and hear the fan but nothing on the monitor. I usually get one beep when booting but i dont even hear that.
My system spec:
Cpu: amd phenom x4 9xx
Mb: msi 970g45 or something like that
Ram: 4 gb 1600mhz
Gpu: gtx 460
Hdd: wd black 1tb
Psu: corsair 80+ 500W
Case: some cheap corsair case but ample air flow
I was running farcry 3 at almost max settings when it just crashed
Sry for the long post guys. Any help is appreciated
I didnt wanna dust in my computer room so i brought it to the basement where 2 things went wrong. First, i tipped it over and second i tried to detach the cpu fan when the whole thing just came off. Including the cpu with the cpu latch still down. I examined the pins on the cpu and it seemed ok. Was able to socket back in without too much effort.
After i finished dusting i tried to power on and i could see lights and hear the fan but nothing on the monitor. I usually get one beep when booting but i dont even hear that.
My system spec:
Cpu: amd phenom x4 9xx
Mb: msi 970g45 or something like that
Ram: 4 gb 1600mhz
Gpu: gtx 460
Hdd: wd black 1tb
Psu: corsair 80+ 500W
Case: some cheap corsair case but ample air flow
I was running farcry 3 at almost max settings when it just crashed
Sry for the long post guys. Any help is appreciated