Teris
Baseband Member
- Messages
- 46
I've got a Seagate BlackAmor 400 NAS storage box with 2x 1.5tb Barracuda drives on RAID1. I cleared the recycle bin cache and restarted the device and now it reports the volume as failed.
I can see the shares if i browse to the root of the device but cant see any data in any of the shares...
Windows cannot read the drives because the file system that the box uses is a Linux varient. A Linux machine recognises the drives as a RAID configuration but i still cannot access his data. I've tried the drives on their own and together on both Windows and Linux.
I've tried to use the following to recover the data:
Both drives have passes diagnostic tests and are reporting as good. The RAID configuration should have defended against this but apparently not. If anyone has any ideas it would be very much appreciated.
I can see the shares if i browse to the root of the device but cant see any data in any of the shares...
Windows cannot read the drives because the file system that the box uses is a Linux varient. A Linux machine recognises the drives as a RAID configuration but i still cannot access his data. I've tried the drives on their own and together on both Windows and Linux.
I've tried to use the following to recover the data:
- P-Magic
- Partition Magic
- Seagate Recovery
- NAS recovery +
Both drives have passes diagnostic tests and are reporting as good. The RAID configuration should have defended against this but apparently not. If anyone has any ideas it would be very much appreciated.