So I was at work and I found an old HP Vectra 515. It didn't have a processor, but I found another Pentium-Based work station that wouldn't boot and took the cpu out. I put the processor into the Vectra, and it had a RAM post error. 2 of the 6 sticks were bad so now it's left with 32MB/16kb of Ram. Now, the problem is, the BIOS isn't detecting a hard drive. I've tried a WD 20GB (Doubted it would work anyway) and a Quantum Bigfoot 2.5gb. Neither of them are detected in the BIOS or Windows 95 Setup. Any ideas? Also I checked the Jumpers. I'm not that big of an idiot.