Old PC case mod

[rime123]

Ok here's the deal
Got one standard case and a 350W or 450W something like that no higher anyway.
And was wondering if anyone had any ideas of stuff to do with a case that is totally not to do with a pc.

I was maybe going to add a Car CD deck to it

Just wondering if anyone had any easy sort of ideas.
maybe something like this

BUT A BIT EAISER

 

[foothead]

BUT A BIT EAISER

It doesn't get much easier than that as far as case modding. It looks like all he did was put a metal plate in place of the 5.25 bays, drill a hole, and install the tap


What type of tools do you have available? Also, a picture of the case would help.

 

[rime123]

nearly exactly same as one in picture and yes i am only 17 so im looking for something i can do fairly easy not very complicated but quite cool at the same time.
maybe get a picture up tommorow

 

[cboucher]

If one side of your case has an acrylic window you could spray paint the inside of your case silver or bright white and rig up a light fixture. You could rig it so that the the power switch on the case turns the "lamp" on/off. You could use a black light if you want it to be cooler.

 

[detox1]

the car audio deck sounds the most feasible. As there is a 12v power supply, thou a single DIN car deck is 7 inches wide and 2 inches tall. tight fit for sure.

 

[rime123]

Yeah I have got a car radio working fine with all speakers connected areial e.t.c but does not fit in cases' drive slots. Custom Hole maybe or can u get PC cases with bigger drive parts?