Random Chit Chat
- Thread starter Rubber314Chicken
- Start date
sniperviper21
Golden Master
- Messages
- 5,460
- Location
- USA
basicly just for show boating around town and MAYBE for more torque off roading. so im guessing a super would be best for that.
this is what im considering doing to my truck, once i buy a truck..
get some dual thrush tubes
super/turbo
3in lift, more or less.
good offroad tires
nice push bar upfront.
tool box in the bed ofcourse.
MAYBE skid plates if i really feel it.
i would LOVE to have a nice, tough truck that can take a beating, look nice around town, sound amazing. ect.
this is what im considering doing to my truck, once i buy a truck..
get some dual thrush tubes
super/turbo
3in lift, more or less.
good offroad tires
nice push bar upfront.
tool box in the bed ofcourse.
MAYBE skid plates if i really feel it.
i would LOVE to have a nice, tough truck that can take a beating, look nice around town, sound amazing. ect.
foothead
Omnicide now.
- Messages
- 10,027
- Location
- My own personal hell
I have been putting my desk together for like 4 hours now, and when I went to put the last piece on, the particleboard just disentigrated. Whoever designed this thing never thought about how having two small screws 1/2" deep might not be enough to support the thing during construction.
So... What do I do now? There is no returning the desk, it was a special order item, and it would take a few more hours to get apart again. Maybe if I drilled bolts all the way through the panel, it'd stay together, but I am still really worried about the side giving out completely.
So... What do I do now? There is no returning the desk, it was a special order item, and it would take a few more hours to get apart again. Maybe if I drilled bolts all the way through the panel, it'd stay together, but I am still really worried about the side giving out completely.
sniperviper21
Golden Master
- Messages
- 5,460
- Location
- USA
pre drill holes and put long wood screws in. dont use bolts.
foothead
Omnicide now.
- Messages
- 10,027
- Location
- My own personal hell
Hmm.. Okay then. I'll need to put some washers or something so it doesn't rip the board any worse. Should I put something in the holes? I was thinking of filling them in with epoxy so it won't just flake apart.
sniperviper21
Golden Master
- Messages
- 5,460
- Location
- USA
drill out different holes...
foothead
Omnicide now.
- Messages
- 10,027
- Location
- My own personal hell
That wouldn't work on this desk. It's way too complicated. Three sides of it need to line up with other panels.
sniperviper21
Golden Master
- Messages
- 5,460
- Location
- USA
nothing is to complicated.
i had to do the same thing for my desk an it was pretty intense
i had to do the same thing for my desk an it was pretty intense
That would be cool.
The 5.4 has enough torques to turn a big supercharger and is the easiest to fit. A big turbo would also be nice but your gonna get lag. Once she spools up though your churning! But you will need to pipe from exhaust to turbo, air intake to intercooler to turbo... lots of piping and it's a bigger job.
You will need an engine ECU remap or adjust the fuel/air ratio to compensate for the extra air your forcing into the cylinders too.
Also make sure your gearbox can handle the extra torque.
sniperviper21
Golden Master
- Messages
- 5,460
- Location
- USA
I'll be surely to look into the tranny when i get around to getting a truck. and i know a few people that could help me do the piping in there own shop so i wouldnt need to pay a regular shop to do it.
just the sound of a turbo whistling.... makes it so much more appealing lol
http://www.youtube.com/watch?v=KoeCn3s0X70&feature=related
http://www.youtube.com/watch?v=HDJJGr5dctE&feature=related oh Jebus
http://www.autotrader.com/fyc/vdp.j...n=&doors=&max_price=&cardist=1&standard=false its beautiful....
just the sound of a turbo whistling.... makes it so much more appealing lol
http://www.youtube.com/watch?v=KoeCn3s0X70&feature=related
http://www.youtube.com/watch?v=HDJJGr5dctE&feature=related oh Jebus
http://www.autotrader.com/fyc/vdp.j...n=&doors=&max_price=&cardist=1&standard=false its beautiful....
