Kage
Golden Master
- Messages
- 13,873
Most fans use a fan controller though, and aren't thermal controlled. At least, my Tuniq Tower on my brothers isn't, and neither is my 9700.
I just have the fan set to low, and leave it at that.
I have set my fan on full for the minute though, and Core Temp reads my Q6600 to be running at around 42 degrees C on each core.
Only a difference of 2 degrees C when set from high to low after 10 minutes
I just have the fan set to low, and leave it at that.
I have set my fan on full for the minute though, and Core Temp reads my Q6600 to be running at around 42 degrees C on each core.
Only a difference of 2 degrees C when set from high to low after 10 minutes