Official Overclocking Score Board

[Remeniz]

Sorry, ladies.

Nice OC my man!

Got may lapped TRUE back and my idle temps are 7'C lower!

I'll be back soon........

4.1Ghz!

These i7's are heat whores though! But on this OC I reckon I could've lowered Vcore...

 

[Grantofhell]

You're definitely getting those temps up high, even with your TRUE lapped?

 

[Remeniz]

You're definitely getting those temps up high, even with your TRUE lapped?

Meh. I got to work on the vcore. I'm increasing it un-justifiably.

I might not need that much vcore.

Work in progress...

EDIT:

And my TJ Max is incorrect!

This is pretty much the limit I think. 4140Mhz! First round in the Blend Test passed. 4160Mhz passed the CPU test but not the blend.

 

[Neodude1123201]

.....And Remeniz is currently in 1st place

 

[Grantofhell]

Wait until Tuesday Bought my new hardware. Should have the remainder of of the rig set up for Tuesday. xD. We'll be ready for one hell of a showdown.

 

[Remeniz]

Wait until Tuesday Bought my new hardware. Should have the remainder of of the rig set up for Tuesday. xD. We'll be ready for one hell of a showdown.

Bring it!

I have managed to achieve the OC with less Vcore and it's stable under all the Prime95 tests. 1.280V @ idle 1.264 under load.

CPU Pass
Large FFT Pass
Blend Pass

 

[worshipme]

Hmm, not been enjoying this thread that much recently. Things are getting out of hand.

 

[sniperviper21]

i seriously need a new rig...lol

 

[Remeniz]

Come on guys.

There's not much between the first four places on the scoreboard.

I'm going to run my next session in the garage when the outside temps drop a bit more.

 

[Grantofhell]

I'll be giving it a shot again soon. Turns out, my new board doesn't support older procs. So benching my P4 is out of my ability. I think. I may be able to get it working but I'll have to do a bit of toying. Gives a checksum issue every boot. And what quite unfortunate is that I'm sporting a C1 Q95. E0 wasn't quite mainstream when I picked mine up, or I got unlucky since TD doesn't list the stepping. -.- Shoulda bought from MicroCenter.