M Mike Nowakowski In Runtime Messages 123 Jul 21, 2009 #1 I want to increase my power supply to a 400W one on my DELL Dimensions 2400 from the original 200W one but will the be ok for the computer is it to much for the motherboard.
I want to increase my power supply to a 400W one on my DELL Dimensions 2400 from the original 200W one but will the be ok for the computer is it to much for the motherboard.
foothead Omnicide now. Messages 10,027 Location My own personal hell Jul 21, 2009 #2 It'll be fine. The board will draw what it needs, no more.
M Mike Nowakowski In Runtime Messages 123 Jul 21, 2009 #3 you think that board can handle a 300W graphics card
Atomic Rooster Omnipotent One Messages 11,161 Location USA Jul 21, 2009 #4 If it has the proper power supply, yes.
foothead Omnicide now. Messages 10,027 Location My own personal hell Jul 21, 2009 #5 The card draws 300w? Or it says 300 required? If so then yes because it plugs into the PSU.
foothead Omnicide now. Messages 10,027 Location My own personal hell Jul 21, 2009 #7 Its fine then, the power it requires is drawn through the PSU, usually. What card is it?
M Mike Nowakowski In Runtime Messages 123 Jul 21, 2009 #8 http://microcenter.com/single_product_results.phtml?product_id=0298083
foothead Omnicide now. Messages 10,027 Location My own personal hell Jul 21, 2009 #9 Well it doesnt have a picture of the card but that one will be fine.
M Mike Nowakowski In Runtime Messages 123 Jul 21, 2009 #10 and is this power supply going to work with the card and the computer http://microcenter.com/single_product_results.phtml?product_id=0307613
and is this power supply going to work with the card and the computer http://microcenter.com/single_product_results.phtml?product_id=0307613