Zer0Cool
Fully Optimized
- Messages
- 1,599
* Original post edited since its no longer relevant *
I was able to boot into Windows using these settings,
8 X 400 FSB = 3200
333/667= DD2 801
Trying to get that stable now, but no luck... Was able to do small fft's for 30 min with no problem, but using large and blend tests, cores 1 & 2 fail after 3 seconds.
I tried setting Vcore from 1.2200v (auto bios) to 1.26875v (bios). CPUz shows as 1.296v (Idel) & 1.264v (load) with everything else default, but no luck. I then tried increasing the NB from 1.33v (bios) to 1.41 (bios) with the same settings, but that didn't work ether. I then lowered NB to default and increased VTT from 1.100v to 1.200v keeping Vcore at 1.26875 (bios) but it failed again. Can someone give me some pointers here with what I should be messing first...etc? Thanks
Here are the current bios pics:
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00023.jpg
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00024.jpg
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00028.jpg
Looking at pic #2 what is the difference between “SB Core PLL Volt†& “SB 1.05v Voltsâ€, when people say increase your SB volts, which one are they referring too? Also do I need to set my timings manually? If so, here is my timings bios pic http://i101.photobucket.com/albums/m62/MALOI2006/DSC00026.jpg & http://i101.photobucket.com/albums/m62/MALOI2006/DSC00026.jpg
My ram: G.SKILL 4GB DDR2 (1066) 5-5-5-15 2.0v-2.10v
My mobo: DFI UP LT P35 FSB = 1333/1066MHz Memory Standard DDR2 800
CPU: Intel Q9450 2.66GHz FSB 1333MHz 45 nm
Thanks for the help.
I was able to boot into Windows using these settings,
8 X 400 FSB = 3200
333/667= DD2 801
Trying to get that stable now, but no luck... Was able to do small fft's for 30 min with no problem, but using large and blend tests, cores 1 & 2 fail after 3 seconds.
I tried setting Vcore from 1.2200v (auto bios) to 1.26875v (bios). CPUz shows as 1.296v (Idel) & 1.264v (load) with everything else default, but no luck. I then tried increasing the NB from 1.33v (bios) to 1.41 (bios) with the same settings, but that didn't work ether. I then lowered NB to default and increased VTT from 1.100v to 1.200v keeping Vcore at 1.26875 (bios) but it failed again. Can someone give me some pointers here with what I should be messing first...etc? Thanks
Here are the current bios pics:
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00023.jpg
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00024.jpg
http://i101.photobucket.com/albums/m62/MALOI2006/DSC00028.jpg
Looking at pic #2 what is the difference between “SB Core PLL Volt†& “SB 1.05v Voltsâ€, when people say increase your SB volts, which one are they referring too? Also do I need to set my timings manually? If so, here is my timings bios pic http://i101.photobucket.com/albums/m62/MALOI2006/DSC00026.jpg & http://i101.photobucket.com/albums/m62/MALOI2006/DSC00026.jpg
My ram: G.SKILL 4GB DDR2 (1066) 5-5-5-15 2.0v-2.10v
My mobo: DFI UP LT P35 FSB = 1333/1066MHz Memory Standard DDR2 800
CPU: Intel Q9450 2.66GHz FSB 1333MHz 45 nm
Thanks for the help.