dude_56013
Fully Optimized
- Messages
- 4,262
Okie doke...changed it.Yes, Intel have confirmed that 100c is the correct TjMax.
What temps should I expect at 3.6Ghz? I know every CPU is a bit different (difference batches, etc.) but is there a ballpark estimate I should be looking for?Start with the stock voltage of 1.15V, and ramp up the FSB as high as you can with the 9x multi. If you've got a gem on your hands, you might get to 3.6GHz with 1.15V, if not, increase core voltage accordingly.
I'm sorry...but what in the HECK is VVT?And FSB or VVT voltage is very important as it is the primary killer and causes the most damage to the 45nm CPUs. I keep it at the stock value of 1.1V and I'm running my E3110 (=E8400) at 4.1GHz 100% stable. So just set it manually to 1.1V
Uh oh...is that implying that it's good or bad?!And good luck since you have a 650i