Control 28 vs Control 28T-60

01001010

01001010

Golden Master
Messages
7,888
http://www.jblpro.com/pages/install/cc_surface.htm#28

[FONT=Verdana, Arial, Helvetica, sans-serif]60 Hz to 16 kHz frequency range (-10 dB) [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]175 watts continuous program power capacity [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]92 dB sensitivity (1W/1m) [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]8 ohms nominal impedance [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]2.8 kHz crossover frequency [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]High-Impact Polystyrene (HIPS) enclosure [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]Spring-loaded input terminals [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in) [/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif]Net Weight: 5.5 kg (12 lb)[/FONT]
Click to expand...

http://www.jblpro.com/pages/install/cc_surface.htm#28T60
  • [FONT=Verdana, Arial, Helvetica, sans-serif]55 Hz to 15 kHz frequency range (-10 dB) [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]175 watts continuous program power capacity [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]60W, 30W, 15W, 7.5W taps at 70V [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]60W, 30W, 15W taps at 100V [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]2.8 kHz crossover frequency [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]High-Impact Polystyrene (HIPS) enclosure [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Spring-loaded input terminals [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in) [/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Net Weight: 6.3 kg (14 lb)[/FONT]
Click to expand...

Anyone care to elaborate the differences between the two?
 
um not much of a difference, but the bottom one is gonna have more bass because of the Hz range is lower then the other one. So it'll pick up more bass than the other one. are u gonna have a sub included with this?
 
01001010 said:
Hey DJ-CHRIS, I know you're into sound. What's your opinion on this?
Click to expand...

These are two very different types of systems. The Control 28 is a commercial audio speaker for something like music in stores, etc. The Control 28-T60 is a high voltage speaker designed for long distances between the amp and speaker, for example playing music in an outdoor garden. As we all know, as the distance of a wire increases, the amount of lost power due to the resistance of the wire increases, theirfor your speakers won't be as loud. Under 25FT and this is not a problem at all, however long distances it is. You drop voltage, not amps, so a speaker like the Control 28 would be for example 10 volts and 25 amps, whereas the Control 28-T60 could run at 100 volts and 2.5 amps and not drop nearly as much power on the way to the speaker.

You need quite special of equipment for 70V commercial speakers, it's not something you should be running.

And theirs the frequency response difference too!, but that was explained above.
 
And theirs the frequency response difference too!, but that was explained above.
Click to expand...

Would the difference warrant the purchase of the Control 28T-60, assuming I had the correct setup?
 
You must log in or register to reply here.

Similar threads

T
  • Locked
Really high CPU Temp, not overclocking, help!
2 3
Replies
22
Views
6K
reggie_da_man
reggie_da_man
Osiris
  • Locked
Hacking and Tweaking XP
2
Replies
16
Views
15K
Osiris
Osiris
Back
Top Bottom