Does it all work when it's outside the case, with the bare minimums plugged in. By bare minimums I mean One stick of ram, Processor, and video-card (if there is no on-board video).
so i think newegg sent me a dead PSU
- Thread starter eggyhustles
- Start date
Does it all work when it's outside the case, with the bare minimums plugged in. By bare minimums I mean One stick of ram, Processor, and video-card (if there is no on-board video).
eggyhustles
In Runtime
- Messages
- 113
yea i only have 1 stick of ram..and no vid card..its on board video..the psu only turns on when its jump started
eggyhustles
In Runtime
- Messages
- 113
no more help guys? 
Atomic Rooster
Omnipotent One
- Messages
- 11,161
- Location
- USA
By doing it outside of the case it eliminates any grounding issues. You plug in all power cables from PSU to the motherboard (24 pin main, 4 pin auxiliary, etc.), install your RAM and connect the monitor. To start it, you will need to use a small screwdriver to "short" the start pins on the motherboard.
Similar threads
