Where to Plug in "Speaker" plug for Case

[jashan17]

Theres a 4-pin connector coming from the case labelled 'Speaker', i have an nforce 680i motherboard and i dont know where to plug it in.

 

[Atomic Rooster]

It goes on the small pins where the power switch connects to. Look in your manual for it's location.

 

[jashan17]

It goes on the small pins where the power switch connects to. Look in your manual for it's location.

Does it go where it says 'Front Audio Connector' in the manual?

 

[jashan17]

In the manual it says where the 'Front Panel Headers', 'IEEE 1394a', 'USB Headers', and where the 'Fron Audio Connectors' are located. Which one should i put it in?

 

[Atomic Rooster]

I don't think so. It should be simply labeled as "speaker" or "spkr" on the motherboard. Look for the pins where the front panel wires connect to on the motherboard. It will be with them.

This is a small black four pin plug with only two wires correct?

 

[jashan17]

I don't think so. It should be simply labeled as "speaker" or "spkr" on the motherboard. Look for the pins where the front panel wires connect to on the motherboard. It will be with them.

This is a small black four pin plug with only two wires correct?

Yeah, where the other front panel connectors connect, the pins are all used and they are placed in the right spots.

 

[Atomic Rooster]

What motherboard is it?

It should be located near them.

 

[jashan17]

What motherboard is it?

It should be located near them.

XFX nforce 680i

 

[jashan17]

What motherboard is it?

It should be located near them.

Is it really important that i connect this cable? or can i do without it.

 

[Atomic Rooster]

It's not too important. It's used for the system speaker that beeps when booting up.

I tried to download the manual for your board so i could have a look, but I get an odd file I can't do anything with.