PC freezes with green lines on the screen?

[Atomic Rooster]

38-40 celsius cpu temp - This is a good temperature for your CPU at idle

chassis fan speed 0 RPM - This will only show RPM if a case fan is attached to the 3 pin connector on the motherboard.

power fan speed 0 RPM - Same as above, but it's for the power supply if it has a cord that attaches to a 3 pin connector. Not many do.

vcore 1.34v - That's the correct vcore setting.

The Q-Fan controllers automatically control fan speeds according to temperature and usage. I've heard that it causes problems in some systems when enabled. So its best left at disabled.

 

[osokk]

well so far so good no crashes yet. i did just get done playing oblivion and it had a error but nothing to do with overheating.

 

[Atomic Rooster]

Good to hear.

 

[osokk]

thanks for the help i will update you if the overheating resumes.

 

[osokk]

update: pc froze up on me again just like before after playing wow for 3 hrs straight. any other ideas why its doing this?

 

[osokk]

vid card is around 140-145 degrees while playing wow.

 

[Atomic Rooster]

Set the fan speed higher?

 

[osokk]

if i set the fan speed higher will that effect the cpu to overheat?

 

[Atomic Rooster]

Nope, it wont. It'll just be louder is all.

 

[osokk]

i dont understand this at all when i went back into ntune to check on the fan settings it was back down to 0??? how did it get reset and i swear i set it at 50 yesterday. also one other thing the ntune tune system device. how does that work?